Work Profile:
Working as Assistant Professor, Chemical
Engineering Department, VGEC, Chandkheda, since November 2022.
5 years of work experience as Assistant Professor,
Chemical Engineering Department, GEC, Bhuj from July 2017- October 2022.
I have 3.5 years of experience in a
comprehensive analytical testing services for the identification and assessment
of environmental contaminates. Worked on the MSD Chemstation software (The
computer system interfaced to the MS for environmental applications) in which analytical
methods (The method, based on U.S Environmental Protection Agency (EPA) method
8260C, includes sample preparation and analysis to determine the approximate
concentration of volatile organic constituents in the sample.) for the
isolation, detection and quantitative analysis of volatiles, semi-volatiles and
pesticides in aqueous/water and soil/sediment samples. I can manage samples on
instrument (Based on a purge and trap GC(Gas Chromatograph)/Mass Spectrometer
and GC/ECD (Electron capture Detection)) and after quanting calculate results
and generate reports according client requirements.
Recent Achievements:
Completed SSIP (Student Start-up and innovation Policy) project on “Air Water Generator”.
Total Experience: 9 Years
Educational Qualification: PhD & M.E Chemical Engineering (CAPD)
Research Area: Thermal Degradation of Solid waste, Pyrolysis, Reaction kinetics
Experience:
Assistant Professor – Chemical Department, Vishwakarma Government Engineering College (VGEC), Chandkheda. (November 2022 – Continue)
Assistant Professor – Chemical Department, Government Eng. College, Bhuj. (July 2017 – October 2022)
Analytical Chemical Engineer - E chem Corporation, Ahmedabad (February 2014- July 2017)
6. S.B.
Prajapati, R.N. Desai, Food Grade Silicone Braided Hose, Volume No.2, Issue
No.4, pp : 201-206 (2013).
7. S.B. Prajapati, R.N. Desai, Silicone Hose with Braiding Technology, International Journal of Engineering Sciences & Research Technology , Prajapati, 2(4): April, 2013
Papers Presented in National conferences:
1. S.B. Prajapati, S. Gautam, Pyrolysis of E-Waste For Fuel Oil Generation: A Review, at 15th annual session of Students' Chemical Engineering Congress organized by IIChE, Department of Chemical Engineering, Shroff S. R. Rotary Institute of Chemical Technology, held on 17-18 October 2019.
2.
Papers Presented in International conferences:
1. S.B. Prajapati, S. Gautam, A. Gautam, Co-Pyrolysis of PCB with Cotton Stalk: Product Characterisation, at International Chemical Engineering Conference 2021, Organised by Department of Chemical Engineering Dr. B.R. Ambedkar National Institute of Technology, Jalandhar, held on September 16 to 19, 2021.
Computer
Programming/Software Skills:
Acquainted with the
Internet, AutoCAD, CCC, MS office, basics of C Programming, Learning knowledge
of ChemCAD and MatLAB,
Additional
Skills:
Certified Fashion Designer
Have own academic You Tube Channels (SChem Sci) and Non-academic ( SS
Buying Reviews)
Department Level
Process Heat Transfer
Academic
Qualification:
Ph.D on “ CO-PYROLYSIS OF E-WASTE AND BIOMASS FOR FUEL OIL
PRODUCTION” from GTU, 2023.
Completed Master of Engineering (Chemical (CAPD))
in the year 2013 from L.D. College of Engineering affiliated to Gujarat
Technological University with 8.14 CPI.
Pursued Bachelor of Engineering degree in
Chemical in the year 2009 from Vishwakarma Govt. Engg. College Chandkheda
affiliated to Gujarat University with 63.5% aggregate marks.
Completed H.S.C. in the year 2005 from
Bhagwati Vidhyalayal affiliated to G.S.H.S.E.B. securing 52%.
Completed S.S.C. in the year 2002 from Shivam School affiliated to G.S.E.B. securing a distinction with 77.86%.
Non Academic Qualification:
Certified course of 2 years of fashion Designing at NIF (National Institute of Fashion), 2016- 2018.
PhD Thesis:
Co-pyrolysis of Printed circuit Boards and Cotton Stalk for Fuel oil Production
Guided By: Dr. Shina Gautam, Professor at SRICT, Ankleshwar, UPL University
In this research, cotton stalk (CS) as biomass is used in different composition with PCB, and its effects on chemical and physical characteristics of pyrolysis oils are evaluated, as well as possible reaction pathway of brominated epoxy resin of PCB and reduced toxicity in co-pyrolyzed products are explained.
M.E Thesis:
Silicone Braided Hose
Guided By: Prof. Rupande N. Desai HOD at L.D.C.E(Rubber Dept.)
In this project I have made food grade
Silicone Braided Hose which has excellent performance characteristics at
extreme high and low temperatures. The project explains the basic manufacturing
process of silicone, Braiding technology, formulation to get better properties,
test properties and cost estimation.
M.E. Project:
Thermoplastic Elastomers
Thermoplastic elastomers are novel
constructional polymers, which are physically cross linked materials made up of
a thermoplastic and an elastomer. This paper reviews the history, physical,
chemical, mechanical, electrical characteristics, advantages and uses of these
materials.
Graduate Projects:
H-Acid
H-acid has long been manufactured and used as an intermediate for the production of dyes and pigments, and is the most important intermediates of naphthalene series. In this I have done Material and Energy Balance along with mechanical design, Cost estimation and pollution prevention.
Biomass Fuel Power Plant
Biomass is the most common form of
renewable energy, by which we can achieve the changes required to address the
impact of global warming. In this seminar report Biomass power plant
Thermodynamic components of power plant, electricity from it and uses and
future scope, etc. are described in a right manner.
Expert lecture on “Fuel oil generation from solid waste” conducted by Vigyan gurjary, in association with GTU.
One week training on “ Application of AI
techniques for research engineering”
One week training on “Matlab Based
teaching learning in mathematics, science and engineering.
One week training in “Advancement in
chemical reaction engineering & Catalysis”
One month training on "COMPREHENSIVE
ONLINE INTELLECTUAL PROPERTY RIGHTS (IPR)"
Two week Training of IP-I and IP- II, Organized by NITTTR, BHOPAL.